How To Install A Toyota Radiator Fan

- May 23, 2019-

How to install a Toyota radiator fan

If there is a heat dissipation problem in the Toyota radiator, it may constitute a computer jam, a crash, etc., especially in the summer, it is very simple to form a heat dissipation inside the main radiator. If the heat dissipation problem of the main radiator is solved, it can pass the device Toyota radiator. The fan radiates heat to the inside of the radiator. The method of dissipating the radiator fan is different, and the heat dissipation is different.

The best way to install a Toyota radiator fan:

Horizontal duct

Horizontal air ducts: For users who choose horizontal air ducts, they are low-end computer equipment. Their Toyota radiators are not very hot, so they do not need good heat dissipation. Often the choice of such a duct is also determined by the original fan in the main radiator, novice friends generally use such an economical and practical air duct, only need to buy two cooling fans.

2. Straight air duct

Straight air duct heat dissipation: After our tests, the natural heat dissipation effect of the straight air duct does have an advantage. Because such a radiator as long as a brand has a trust in the familiar DIY players must know, so that the heat sink's hard disk is located on the backplane, so it is very good heat dissipation, so the hard disk temperature is high, the CPU, GPU cooling effect It is really good and is superior to other structural design heat sinks.

3. Three-dimensional air duct

The three-dimensional air duct needs more electric fans: the three-dimensional air duct is a fan with five electric fan units. As long as it can be built into a three-dimensional air duct with excellent heat dissipation, the heat dissipation is good, and there are disadvantages. The electric fan has more noise. Therefore, users should choose the radiator fan according to their needs.

How to properly use the radiator cooling fan?

Generally, the Toyota radiator fan is installed at the front of the radiator, and the cold air is sucked into the upper part of the main board in the early part of the radiator, and finally discharged by the power supply fan to constitute convection. It is best to consider the direction of air flow. The best solution is to install a fan in front and rear, spread in diagonal directions, and then the heat dissipation effect of the entire radiator is very good. The front fan of the radiator is blown to the inside and the rear fan is blown to the outside. The convection CPU, graphics card, hard disk, optical drive, north bridge, south bridge and other chips on the board are heating the air in the radiator at all times. If these hot air are not discharged out of the box, it will seriously affect the heat dissipation of various components and affect the operation of the computer. life.

Generally, there are two places where the radiator can be equipped with a fan. The front part is generally at the hard disk bracket, and the back is generally below the power supply and above the keyboard port. The radiators with higher prices are now equipped with 1 or 2 fans. The air flow principle should be followed when installing the radiator fan. If the fan of the device travels out, the internal air path of the radiator is very regular from early to the next; if the Toyota radiator fan unit is inverted, if it is forwarded or forwarded, then the power fan will also be out of the wind, which will constitute a windy road chaos. .